View Full Version : 13 inch Southbend parts

02-13-2005, 12:40 AM
I am looking for a source for some of the feed drive gears. The reverse and forward selector gears.

02-13-2005, 07:57 AM
I'd try "the usual suspects" list of used machinery dealers that advertise in HSM: Dave Sobel, Plaza Machinery, etc.

Or, try South Bend http://www.southbendlathe.com/ although, if they have the parts, they'll probably cost a small fortune. (If you do want to contact South Bend, a phone call is likely to work a lot better than e-mail.)