PDA

View Full Version : Ford N parts



spkrman15
02-12-2005, 07:17 PM
Hey everyone,

A local farmer, in his 80's and an all around good guy, is looking for a fender off of a Ford N tractor. I am not too familiar with all these models, but he said the fneder of an 8N would do.

Do any of you have one, know where i could get one, or let me know if i should give more info.

Thanks in advance
Rob http://bbs.homeshopmachinist.net//smile.gif

IOWOLF
02-12-2005, 07:24 PM
AN 2n ,8n , or 9n would work.
try this....
http://www.valu-bilt.com/cgi-bin/sgdynamo.exe?HTNAME=_home.htm&UID=2004071918173129&GEN2=&GEN3=&GEN9

Chester
02-12-2005, 09:07 PM
If all else fails try here:

http://www.ytmag.com/cgi-bin/boards.cgi

They have a section on those 'N' tractors

gunsmith
02-13-2005, 05:46 PM
I am restoring an NAA which is similar but a few year newer. Ebay has lots of reproductions at reasonable prices. If you want original you better find one on your own in some old out of the way place. They are worth a small fortune. I deal with a company called "Yesterday's Tractor Co." and they will have everything he may need at reasonable prices. They are also on the net under that name.

[This message has been edited by gunsmith (edited 02-13-2005).]

spkrman15
02-14-2005, 04:55 PM
Thanks guys. that information realy helped

Rob http://bbs.homeshopmachinist.net//smile.gif