PDA

View Full Version : Diemaker to HAAS to Fanuc 16iM Ikegai Horizontal- It is blowing me away!!!!!



Dave7m
03-10-2005, 11:00 PM
I've been a Diemaker for too long! Got turned on to HAAS VF-3 about 5 years ago and now I am freaking out on a Ikegai Horizontal Boring Mill with Fanuc 16iM controller and 60 ATC! Am I retarded or would this really be a step back in ease of operation? Being a relative "newbie" to CNC, Fanuc IS DANGEROUS compared to HAAS especially during restart!!!!!!!!!!!!!!!