PDA

View Full Version : I got bent with a little help.......Many Thanks.



Gord
04-16-2005, 09:52 AM
Hi All,

Once again I'd like to thank all of you who helped this woodworker figure out a way of bending aluminium rod. This puppy worked great and pictured below is a piece of 1/4" bolt and a piece of 3/8" threaded rod. It was a breeze to bend this stuff; the aluminium will be a walk in the park.

Hope the pictures turn out.

Many thanks.

All the best
Gord
http://img.photobucket.com/albums/v191/gordgraff/Bender1.jpg
http://img.photobucket.com/albums/v191/gordgraff/Bender2.jpg
http://img.photobucket.com/albums/v191/gordgraff/Bender3.jpg


[This message has been edited by Gord (edited 04-16-2005).]

[This message has been edited by Gord (edited 04-16-2005).]

precisionworks
04-16-2005, 10:44 AM
Cool!

That's a handy thing to have around, always a need to bend something. Nice job.



------------------
Barry Milton