PDA

View Full Version : Angle Vises



jfsmith
10-26-2002, 04:52 PM
I have a small mill and need to do some bevels like cuts for a knife blade. What kind of angle vise should I use and I will be milling 440c type of stainless steel, maybe up to a 1/4 inch thick.

Thanks.

Jerry

Thrud
10-26-2002, 07:42 PM
One that works for what you want to do. You could also use an adjustable angle plate under a regular vise. Or you could make a fixture to do exactly what you want to do.

jfsmith
10-26-2002, 09:59 PM
I have been thinking about making a shem or plate to put underneath my current vise. I do have one of those cheapy angle vises, but I beefed it up some.

Any suggestions are welcome, this is new ground for me.