PDA

View Full Version : Looking for a Cam Grinder Plan



bikenut
02-28-2006, 01:58 AM
I'd like to build a grinder for cams and crankshafts for my model IC engines. Anyone with a good plan to share?

Tin Falcon
02-28-2006, 05:53 AM
November/ December 2004 Home Shop Machinist

SGW
02-28-2006, 07:46 AM
I'm pretty sure there were plans for a cam grinder in some back issues of Strictly I.C. magazine...although at this point I don't know where you would find the back issues.

Ausserdog
02-28-2006, 12:24 PM
SIC back issues are still available from the Washburns. I think there were at least 2 different cam grinder plans in there. HSM has had one or two as well.
Here is the web link for SIC:

http://www.strictlyic.com/

------------------
Tom

Be careful what you wish for, you might just get it!

[This message has been edited by Ausserdog (edited 02-28-2006).]

[This message has been edited by Ausserdog (edited 02-28-2006).]

bikenut
02-28-2006, 03:19 PM
Thanks fellas, Those Strictly I.C. mags are a goldmine of info. I'm sending in my order.

------------------
Smitty.... Ride Hard, Die Fast