View Full Version : Atlas 10" lathe
I have an Atlas 10" lathe model QC-54 that I am refurbishing. Someone had replaced the original 2 step motor pulley with a single pulley. I was considering making one, but I don`t know the dimensions (diameters) of the original pulley. Does anyone know the diameters of this pulley?
bdarin
06-11-2001, 10:03 PM
I also have an Atlas 10", a little older than yours. The pulley can be bought from Clausing tools in Indiana. Go to Clausing.com for details. The motor pulley looks to be about 4" for the big one and about 1-1/4" on the small one. My machine's at work along with all my data sheets so I'm going from memory here, but if you have any questions on your Atlas, I'll be glad to look up any details and help if I can.
George Hodge
07-14-2001, 09:32 PM
<font face="Verdana, Arial" size="2">Originally posted by bdarin:
I also have an Atlas 10", a little older than yours. The pulley can be bought from Clausing tools in Indiana. Go to Clausing.com for details. The motor pulley looks to be about 4" for the big one and about 1-1/4" on the small one. My machine's at work along with all my data sheets so I'm going from memory here, but if you have any questions on your Atlas, I'll be glad to look up any details and help if I can.</font>
Hey,if you haven't gotten the measurements for the motor pulley yet,let me know. I've got one just like yours in my shop. GH