PDA

View Full Version : Drill Press



Oby1
10-01-2001, 10:32 PM
Just got a Handee drill press,made by
Chicago Wheel & Mfg Co. It's not all their!
Looks to have some type of collet chucking
system that I didn't get. Anybody ever see
one of these?
Bob G

------------------
Bob Indiana

C. Tate
10-03-2001, 08:09 PM
I have a very old drill press circa 1940. This drill press had a collet system that worked in the morse taper socket. The main body is a #3 morse which is split in two pieces and accepts a collet which is sized to take collets for drills with no tapered shank. Does this sound similar?

spazman
10-04-2001, 07:05 AM
Bob Indiana ,
dont how close you are to me here in ft wayne but if you need help retooling that or what not feel free to email me

spazman_77@yahoo.com

maybey i can help i have made a few morse taper split collars for machines like yours

Oby1
10-06-2001, 11:45 PM
The spindle hole dia. is 5/16in.with a flair at the bottom. Spindle lenth is about
4in. Does that help.
Bob

------------------
Bob Indiana