View Full Version : Right Angle Attachment

08-30-2004, 04:55 PM
Help Gang!

I'm looking for any and all information on a Quill Master Milling Attachment, Type JA.

A parts diagram with part numbers would be of great help.

Thanks in advance.

John B

kap pullen
09-01-2004, 07:15 AM
We have that unit at work in the tool room.
I will look in the box for paperwork and copy if avalible.

I have used that for small keyways, oil grooves, squareing out holes, as well as drilling from a bore to a grease fitting hole.

They are handy, but fragile and light cuts must be taken.


09-01-2004, 07:40 AM
Kap, thanks so much. I appreciate your help!

John B