60soon
04-15-2005, 09:00 AM
Need some guidance on the electrics involved to do 12 simultaneous welds on .060 wire with .250 spacing. This would be a continuous length mesh, 16 inches wide.
precisionworks
04-15-2005, 09:49 AM
Have you looked to see if SS mesh is commercially available that meets your specs? Sounds like it might be.
It sounds like you're wanting a micro spotwelder. Miyachi makes a number of models: http://www.tjsnow.com/supplies/miyachi/finespotheads.htm
------------------
Barry Milton