PDA

View Full Version : Quick tool holder



cruzinonline
05-10-2006, 01:10 PM
We had a problem with limited space (8' x 20') with a mill, a lathe, and a work bench in portable containers. One of my guys came up with this little tool to control some of our tooling. Just a piece of angle and some plate. Thought some of you might be interested.

http://www.metalworking.com/DropBox/toolholder2.JPG

http://www.metalworking.com/DropBox/toolholder1.JPG

Millman
05-10-2006, 02:49 PM
Now that's the kind of Christmas tree we ALL should have. That idea is better than most shops had. Some were just laying around and you had to hunt for them. Still can't stand people who don't put their tooling where it goes.

BobWarfield
05-10-2006, 03:33 PM
Still can't stand people who don't put their tooling where it goes.

Anal retentive ACTIVE aggressive? Sorry, just joking there.

That is a cool idea. Will have to make one of those. Also on the lookout for the equivalent racking to holding my mill cutters and gagdets.

Best,

BW

cruzinonline
05-10-2006, 10:15 PM
got the name wrong on the other pic. sorry for the flub

http://www.metalworking.com/DropBox/tollholder1.JPG