PDA

View Full Version : Power feed help needed



ka6gzj
05-21-2006, 02:36 PM
I was just made a gift of an x axis power feed. The proublem is, the plastic gear on the bottom needs to be replaced and i don't have a clue who made it or where it came from. All it has on it is, APF-100A. I am hoping some one of you might have one like it and be able to tell me where i can get parts.
Any help would be greatly appreciated.
Thanks,
Jim

torker
05-21-2006, 02:39 PM
Jim do you have any pics of that powerfeed?
Russ

ka6gzj
05-21-2006, 04:07 PM
Russ, I don't have any pictures at this time, I can take some later and try to post them (i've never done it on this forum). maybe you know, can pictures be atached, or do i have to go through the photobucket?

Jim

Never mind the question, I found the answer at the bottom of the page.

Peter N
05-21-2006, 04:33 PM
First of all take the cover off the base and have a look inside, when new they ship with a spare plastic gear inside there.
If its gone/been used then have a look here:
http://gromax-usa.com/millings/accessories/misc.htm

regards

Peter