DICKEYBIRD
04-24-2007, 05:18 PM
I'm putting together an order for little stuff from ENCO and one of the things I need is a round stone to hone the concave edges of home-made HSS form tools (used on aluminum) Here's the choices:
http://www.use-enco.com/CGI/INPDFF?PMPAGE=155&PMCTLG=00
Would AO or SC be better? I'm thinking I'll get fine, med & coarse but don't want to get both materials. What say you'uns?
http://www.use-enco.com/CGI/INPDFF?PMPAGE=155&PMCTLG=00
Would AO or SC be better? I'm thinking I'll get fine, med & coarse but don't want to get both materials. What say you'uns?