I'm having problems with the pull cord rewind mechanism on a Toro lawn mower. The little shoulder bolt that holds the cover over 2 little pivoting ears that swing out to engage the "whatchamacallit" (bolted on top of the flywheel) keeps backing out. There's a spring under that cover so and if it's tightened too much the little ears no longer swing out... and no engagement takes place. I'd pulled the thing off and disassembled 2 or 3 years ago, and would like to get it working again. But I can see nothing in the design that would prevent that bolt from backing out.
Isn't there one of the Loctite formulas made for purposes like this, but yet permits later removal?
Isn't there one of the Loctite formulas made for purposes like this, but yet permits later removal?
Comment