View Full Version : Work Pics

01-28-2008, 04:48 PM
Ok so i've asked plenty of questions but not really shown any of my own stuff so ... made a couple of bike chain guards for a customer this weekend, both out of 316 stainless, the top unslotted one hasnt had its final polish yet hence the visible scuffs.


01-28-2008, 06:05 PM
nice job.

how are you doing the bend on the radius ?

01-28-2008, 06:09 PM
custom chain guards, sounds pretty expensive

nice work

01-28-2008, 07:07 PM
how are you doing the bend on the radius ?

Thankyou. and the bend on the radius is done by cutting a wedge out of the sheet doing the long 90* bend then forming the radiused bend over a wooden former, then tacking it every 20mm or so, then its tig'ed along the edge to fuse it then ground back and polished.

They arnt massivly expensive parts but i know the guy they are for has spend *alot* of money recently on his bikes as for what the bikes are im not sure. I have about 2 - 2.5 hours in the slotted one not sure how long the other took but it wasnt as much for obvious reasons.

01-28-2008, 08:04 PM
Beautiful works of art!