View Full Version : need lantaine metal lathe info

03-04-2008, 06:35 PM
Hi all: I'm new here but have been around Vancouver Island 60 plus years. Anyway, I have a lantaine metal lathe Model LAM 350CH which has a cracked worm gear. This is, to me, the sacrificial part of this lathe. Its "gun metal" but I would call it sintered bronze. I understand that the Lantaine is maybe a clone of the following or vice versa: Peerless/ Frejoth/ Repco/ MacMillan. Anyone know for sure? Do you guys know of any dealers who would carry parts for this lathe? Thanks for your time, Wayne.

03-04-2008, 07:05 PM
Welcome to the group. Your joining may have tipped the balance -- it seems there may be more Canadians than Americans. Are you from Port Alberni?

03-04-2008, 07:40 PM
You might try a supplier like Boston Gear and see if it's a stock generic part (or if it can be made from a stock generic part with some modifications.)

Limy Sami
03-04-2008, 07:49 PM
Found this


Could be a starting point.