PDA

View Full Version : Fray mill



lane
08-06-2008, 08:26 PM
here you go
http://cgi.ebay.com/FRAY-ALL-ANGLE-MILLING-MACHINE-MODEL-10R-VERTICAL-MILL_W0QQitemZ270262229751QQihZ017QQcategoryZ12584 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
any one want a mill .looks good.

murph64
08-06-2008, 09:26 PM
Holy smoke that thing's clean!


Andy

pcarpenter
08-07-2008, 12:07 AM
That really is a very versatile machine. It doesn't look heavily built by most standards, but could be a really capable machine for a home shop

kvom
08-07-2008, 09:06 AM
Might need two DROs though :D

murph64
08-07-2008, 09:25 AM
Might need two DROs though :D


[Guinness_Commercial]

BRILLIANT!!!

[/Guiness_Commercial]

Never would have thought of that..


Andy

daryl bane
08-07-2008, 10:26 AM
No need for a Volstro on that one. Those west coast guys sure make some neat stuff.

lazlo
08-07-2008, 02:01 PM
It kind of looks like an Everede rotary head mounted on a turret column, but the Everede and Voltros have power feed, which this doesn't look like it has.

Neat machine - 30 Taper, so John would be happy :D
It looks lightweight though -- it probably won't take a big cut, but a Volstro can't either.

tiptop
08-07-2008, 10:37 PM
Well I can tell you all I sure like mine. They do not weight as much as your bridgeports but they will work real hard. Probably the most frail part is their backgear set up. I have VFD on mine and that took care of that. If it was on the west coast I would bid. Jay

murph64
08-07-2008, 10:57 PM
When I finally pick up a VFD, I'll be able to add my own experience with one of these machines...


Andy