PDA

View Full Version : Van Norman dividing head



John Stevenson
12-30-2008, 06:53 PM
Anyone got a manual on one of these please.
Need to check some stuff out with some bits I have, or rather don't have.

Mutzi gratzi penis [ that's Spanish for thank you cock ]

.

oldtiffie
12-30-2008, 07:27 PM
I guess you've checked John, but just in case, is this any help?

http://www.google.com.au/search?hl=en&q=van+norman+manual&btnG=Google+Search&meta=

rockrat
12-30-2008, 07:33 PM
Someone will probably beat me to this but... I may have a copy here somewhere. Which one? It seems to me that there were 2 different ones. Might have been listed as collet size instead of big and small.

Rock~

lane
12-30-2008, 07:35 PM
I got a 10 inch head John . I do not have a manual but I have some info. They made 2 heads a 7" and a 10" and and some changes over the years on the 10 " I think Rockrat has one also.
http://finance.groups.yahoo.com/group/vannorman/ some info here and here. If nothing else ask me what you need I may have some info. Bunch of heads on e-bay under Van Norman.

rockrat
12-30-2008, 08:05 PM
Yup, I have the 10" :D

Click for larger photo.
http://i4.photobucket.com/albums/y128/katiecat222/van%20norman/th_10inchdivider2.jpg (http://i4.photobucket.com/albums/y128/katiecat222/van%20norman/10inchdivider2.jpg)

Heres the 7" - it looks like a dividing head but smaller. (I'm sorry, I'll stop)

http://i4.photobucket.com/albums/y128/katiecat222/van%20norman/th_accessory_page3.jpg (http://i4.photobucket.com/albums/y128/katiecat222/van%20norman/accessory_page3.jpg)


I dont however see a copy of the manual. Sorry. If you have the 10" let me know what you need and I can get a photo of it. I dont have the original footstock. I had to find one that was close.

rock~

lane
12-31-2008, 04:46 PM
All the same here John. I think I got my info from Rockrat.

rockrat
01-01-2009, 10:05 PM
So whats the word John? Did you end up with what you needed? And if so, did you get a manual that we don't have? Share the wealth!

rock~

John Stevenson
01-02-2009, 04:52 AM
I found the table of leads and divisions on the Van Norman Yahoo list and that's all I managed to find.
I passed this on as it was for a friend but I think he wanted more of a spare parts list.

Thanks to all that replied and for the help.

lane
01-02-2009, 08:21 PM
Their aren`t any spar parts . The head needs all of them to work right .They are pretty simple not much to one.

John Stevenson
01-03-2009, 05:39 AM
Their aren`t any spar parts . The head needs all of them to work right .They are pretty simple not much to one.

Lane,
I know that and you know that but some people need a 12 page manual for a screwdriver.