PDA

View Full Version : Fox Machine Company 3 1/2 Mill



ormachine
01-05-2009, 12:36 AM
Is anyone familiar with a Fox Machine Company Mill model 3 1/2.
Looks like a horizontal mill converted to vertical with a bridgeport head on it.

Thanks, Ron

ARFF79
01-06-2009, 05:06 AM
I have one without the door in the side. It was a hand miller that had the ability to use a powerfeed through a gearbox. The spindle is most likely #9 B&S (mine is). The gear box on mine also had a hand wheel that I found to turn the rack .200 per rev. Yours may be different or may be lacking parts as no photo is shown.