PDA

View Full Version : Small gear cutter missing parts



gary hart
01-21-2009, 01:14 AM
Restoring small gear cutter made by Waltham Machine Works. Mostly done but missing some linkage that rotates sector gear that moves index wheel. Searching on internet hasn't turned up anything that will help me make the missing parts. Hoping someone will know someone who has a machine like this one or picture showing the linkage.

Base on machine is 16 inch square and serial number is 348. This is for small watch type gears. Some of the cutters are 100 DP 14 and half PA

Appreciate any leads....... gary

Right side with missing linkage
http://img.photobucket.com/albums/0903/ghart3/Waltham/yWalthamlinkage.jpg

Thumbnail of back side
http://img.photobucket.com/albums/0903/ghart3/Waltham/th_yWalthamback.jpg (http://smg.photobucket.com/albums/0903/ghart3/Waltham/?action=view&current=yWalthamback.jpg)

thumbnail of front
http://img.photobucket.com/albums/0903/ghart3/Waltham/th_yWalthamfront.jpg (http://smg.photobucket.com/albums/0903/ghart3/Waltham/?action=view&current=yWalthamfront.jpg)

thumbnail of left sidehttp://img.photobucket.com/albums/0903/ghart3/Waltham/th_yWalthamright.jpg (http://smg.photobucket.com/albums/0903/ghart3/Waltham/?action=view&current=yWalthamright.jpg)

tiptop
01-21-2009, 06:07 PM
Gary,

Sorry I can not help, but I would like to say that is a nice looking machine and I wish it were mine.

Jay