PDA

View Full Version : identify emco vise??



Mcgyver
03-21-2009, 12:05 PM
hey guys,

I've got this old Emco vise, came form a guy who had a maximat...but the hole spacing on the vise are spaced at 75mm and the bigger maximat's are 95 (at least the bigger ones)

anyone know what the T slot spacing is on the smaller maximat 7 or 8....or have ideas for me as to what Emco machine this is for?

jaw width is about 2.5, opening 2.5

thanks


http://i20.photobucket.com/albums/b201/michael0100/ebay/Emco/Vise/DSC_8918-large.jpg

Circlip
03-21-2009, 12:25 PM
Ya don't want to keep that OLD thing Mcgyver, much better to send it over here. :D Have a look at the spacing for the milling table they supplied, OR the MENTOR stand alone milling machine they made using the Maximat/Super 11 milling heads.

Regards Ian.

Just checked the slots on my cross slide (V10) 45mm and 90mm

And it wasn't on the supply list for the V10, V10P, Compact 10 or Super 11. Definately scrap.