If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I got a 6" phase II for christmas. I am sure it has a manual with it, and i t should be (may be) the same manual. PM me if you still need the manual and you think this will work for you. I will be happy to make a PDF for you.
unless I am badly mistaken, the "Phase 11" (pretty well in the US only) is the same as or is a "re-badge" of a Taiwanese "Vertex".
I have only read of good reports of the "Phase 11" and I am very impressed with my "Vertex" 8" and 6" rotary tables.
Here are the links to pics/scans of my 8" "Vertex" - let me know if there are any problems with the images or down-loading of them - I expect there not to be - but ........ !!
And despite the rather "suspect-looking" test sheet, I can assure you that my rotabs meet their specs - and I've got some pretty reasonable stuff to check them with. They came up fine here.
I think that, providing that the rotab is in good condition, that you have a very good tool that you will be very happy with.
Bloody heavy though - and an awkward "lift" - so be careful.
Comment