PDA

View Full Version : vanamo 14" shaper



oldiron
11-16-2009, 08:42 AM
Hi all
I just purchased a nice shaper and have a couple of questions for you all.
The machine has lube fittings that look some what like grease fittings but are a little larger. What kind of lube do these take I would think it uses a specal oiling gun instead of grease if so could I replace these fittings and decated a grease gun with oil ? Also I purchased this machine to be able to do internal splines and key ways so I need to find what I think is called an extenshion or a tool holder like a boaring bar for a lathe. Any ideas as where to find such a tool? Thanks in advance for the help. Larry

CountZero
11-16-2009, 01:35 PM
No info to add just did a quick search and came up with this old thread: http://bbs.homeshopmachinist.net/showthread.php?t=10141

It was probably made less than 30km from where I'm typing this..

ptjw7uk
11-16-2009, 03:08 PM
CountZero it would be nice to know where you are!

Peter

CountZero
11-16-2009, 03:44 PM
I thought I had my location in my profile... fixed.. to be more a bit more specific, within a 30km radius from Värnamo, Sweden.