View Full Version : Falcon .22
12-04-2009, 03:42 PM
I am looking for a front site for a single shot .22 made in West Germany. The site slides on from the end of the barrel the dovetail groove is cut into the site not the barrel anybody know where I can get one or am I going to have to machine this part myself.:confused:
try one of the airgun sites, RWS ,BEEMAN , alot of those guns have that type sight
12-05-2009, 01:20 PM
There are several different dovetail sizes used on German rifles with this type of sight. You'll probably have to fabricate one. When you do, leave it taller than you think you'll need, and cut it down at the range to get it sighted in at your "zero" distance.
12-05-2009, 10:23 PM
Thanks guys, it looks like I'm gonna have to make this myself. I'm thinking brass or aluminum. The good thing is the rear sight is a nice adjustable one.