View Full Version : Gatling gun update
02-05-2010, 12:53 PM
My Rgg gun is almost done, I'm not finished with the mag base and a lot of polishing and detail work left to do. Here is a pic, not very good but I will get some better ones....
For those that may be interested in these guns, I started a new forum also... http://www.gatlinggunforum.com/forum/index.php
02-05-2010, 07:59 PM
Not bad !
I bought the plans about ten twelve years ago.....terrible at best.....what was worse was trying to get that turd to return a phone call or any form of communication with him to elaborate on the poor plans..
I ended up buying a 3/8 hex broach for the cylinder, made the cam and all of the firing pins. bought some barrels locally ....far superior to the brazed in liners they suggested....completed the rotating assembly....bought the gears for the crank assembly.....and that was as far as I got....
does the magazine operate? cant tell from the pics....
you did a very nice job on that piece....you should be proud
02-05-2010, 09:08 PM
The magazine will operate when im done, a 360 round broadwell drum. Im still working on the base to it.... I will get some better pics posted.