Hollowbuilt
03-11-2010, 09:09 AM
Finished up the mill, and took it on its maiden voyage. The video is the third down from the top.
http://www.youtube.com/watch?v=9LOYz47FYbs
I am working through the routines with a friend, and am fine tuning its use by making machine-specific macros.
The machine makes the strips that are glued together to create bamboo fly rods.
Chris
http://www.youtube.com/watch?v=9LOYz47FYbs
I am working through the routines with a friend, and am fine tuning its use by making machine-specific macros.
The machine makes the strips that are glued together to create bamboo fly rods.
Chris