PDA

View Full Version : Need help: Idler pulley on a shoulder bolt..



cuemaker
04-19-2010, 10:16 AM
My problem is I need to hold the pulley out away from the body of what its bolted to..But that leaves lots of room for the pulley to slide on the shoulder of the bolt.

The only idea I can come up with is to put a piece of tubing to act and as a stand off....

Any other ideas?

Thanks

Highpower
04-19-2010, 10:35 AM
Stepped washer.

http://www.racepartsusa.com/shop/files/images/thumb/ALL31034.jpg

Ken_Shea
04-19-2010, 10:39 AM
Rubber tubing, steel sleeve, washers as a spacer, nothing wrong with that.