View Full Version : LeBlond #1 T&C Grinder Help Needed

Dale Lusby
07-14-2010, 04:02 PM
I picked up a tool and cutter grinder the other day and put it back together. There are a few parts missing so I'm hoping someone can help me out. I need some pictures of the spindle/head as well as pictura of the handwheels and leadscrew that move the saddle in and out. I'll try to get some pictures of mine up soon as I'm on my mobile.

07-16-2010, 01:12 AM
Hi Dale,
I used to own the LeBlond in the pictures below. These pictures are from when it was in my shop.

Also check the yahoo tool grinding group:
You will notice the picture on the welcome page is a LeBlond #1, so I'd bet the moderator has some information about the #1.