PDA

View Full Version : Slightly OT: Propane burner design



BillDaCatt
06-24-2011, 07:42 AM
For those of you who are interested in building your own melting furnace but can't find the propane burner info on www.backyardmetalcasting.com , here is a direct link: http://www.backyardmetalcasting.com/oliverburner1.html

Enjoy, have fun, but be careful. Pouring molten metal is potentially very dangerous! The melting point for Aluminum is 1220F (660C). That is six times hotter than boiling water! :eek: