Hello,
This is a long shot but would anyone have or would know where I can find Outside clamping Hard jaws for a Union Mfg. Co. 5" 3 jaw self centering scroll chuck.
The # on the front of the chuck is #5-3158 and on rear it is stamped B191B, D652A which I believe are the jaw #'s because the inside clamping jaws that I have are marked with 1 of those two #'s and that No. is D652. The jaws are a 1 piece jaw aprox. .431 wd. x 1.975 lg. x .875 hg. from chuck face. The 2 slots above the scroll that slides in the chuck are .175-176 wide x .254thick. The chuck is in great shape but I need the outside jaws that clamp on the OD of a part.
Thanks.
Richard
This is a long shot but would anyone have or would know where I can find Outside clamping Hard jaws for a Union Mfg. Co. 5" 3 jaw self centering scroll chuck.
The # on the front of the chuck is #5-3158 and on rear it is stamped B191B, D652A which I believe are the jaw #'s because the inside clamping jaws that I have are marked with 1 of those two #'s and that No. is D652. The jaws are a 1 piece jaw aprox. .431 wd. x 1.975 lg. x .875 hg. from chuck face. The 2 slots above the scroll that slides in the chuck are .175-176 wide x .254thick. The chuck is in great shape but I need the outside jaws that clamp on the OD of a part.
Thanks.
Richard
Comment