PDA

View Full Version : Machinery Repairman Manual



914Wilhelm
09-18-2011, 06:51 PM
I have a copy of the Student's Guide - Class A School Machinery Repairman manual from the Naval Training Center. This seems to be a basic introduction by the armed services, however I like the tone of the explanations in it. Are there advanced versions of this manual on the web? I've searched without a great deal of luck but suspect the HSMWMBBS collective brain has greater specific knowledge for this than Google. Thanks.

TOOLZNTHINGS
09-18-2011, 07:08 PM
Hello,

Was Machinery Repairman while in the Navy. Do not recall another book. I did not attend class A school so there could be more manuals. I still have the same book and it is a good one to own.

Brian

alanganes
09-18-2011, 07:17 PM
No idea if this has anything like you are looking for, but there alre lots of military and other manuals available here for free:

http://www.liberatedmanuals.com/


Mostly just an FYI for future reference.

914Wilhelm
09-19-2011, 01:44 AM
Well, looking around I at least found a newer copy on the net. Quite a few pictures are deleted due to copyright. I like the gear section.
http://www.metalwebnews.org/ftp/machinery-repairman.pdf

Also found Machinery Repairman 3 & 2
http://www.eric.ed.gov:80/PDFS/ED203130.pdf

Dr Stan
09-19-2011, 11:27 AM
I went to the Navy's MR school in 1973 and have never found another book that equals the MR 3 & 2. Here is a link to the 1990 version which I also posted in the gear cutting thread. http://www.archive.org/stream/machineryrepairm003995mbp/machineryrepairm003995mbp_djvu.txt

Stan

Krunch
09-19-2011, 12:14 PM
Great resources to save to the hard drive. Thanks for posting, all.