PDA

View Full Version : Metal Spinning Article Sept/Oct 2002



Spookydad
01-03-2012, 01:21 AM
Does anyone have a copy of the article "Getting Started in Metal Spinning" part 2? It was in the September/October 2002 issue.

I have part one but can't find part two.

Thanks

Neil

Daron Klooster
01-03-2012, 09:47 AM
Hello Spookydad,

That article you're looking for (Getting Started in Metal Spinning - Part 2) is in the Home Shop Machinist, September/October 2002 issue. This issue is available for purchase by calling our subscription services people at 800-447-7367. They'll get you taken care of.

Spookydad
01-03-2012, 02:47 PM
Ok Thanks.

From the website, it didn't look like the back issues for that far back were available.

George Bulliss
01-03-2012, 02:51 PM
We donít have all the available back issues displayed on the website. Iím not 100% sure if we have this one in stock, but a call to the sub-services people will get you the answer. If we donít have it in stock, we can photocopy the article for a small fee.

George

john hobdeclipe
01-03-2012, 04:29 PM
Hello Spookydad,

That article you're looking for (Getting Started in Metal Spinning - Part 2) is in the Home Shop Machinist, September/October 2002 issue. This issue is available for purchase by calling our subscription services people at 800-447-7367. They'll get you taken care of.

What issue was Part One in?

Spookydad
01-03-2012, 06:06 PM
Part 1 was in the July/August 2002 issue. Yellow cover with a bowl being spun.

I want to make a roller tool so I can try spinning on my lathe. I have tried but don't have any tool that is both hardened and polished. I have torn up all the material that I have tried so far.

Neil

rkepler
01-03-2012, 08:27 PM
The part on tool making was in the 2002 Nov/Dec issue.