PDA

View Full Version : Has anyone added a taper attachment to a G9249



outlawspeeder
01-02-2013, 12:39 PM
I have a grizzly G9249 and of course there is not a stock attachment from them. I already pulled the back allen bolt and the slide is free to move. I have a plan in my head but though I would ask to see if anyone has built one.
I can hear the crickets chirping.
Some of my concerns:
This model has a removable bed.
The first casing web is far from the head so I may have to blind tap into the back of the lathe.
I see many attachments with a bar. What is that for?

achtanelion
01-02-2013, 04:48 PM
You may want to look at making or adapting a telescopic taper attachment.

J