PDA

View Full Version : Scratch built Allman Engine



lane
02-14-2013, 10:09 PM
Does any one out their have a Allman engine they built from Debolt Machine . It was a casting kit of a limited number of engines cast. I plan to scratch build one I have their drawings but need some info on the main body casting and cylinder casting. Some of the dimensions I will need are not on the drawings . Like the base is round ,but what diameter. and how thick. If you have any information please pm me . Thank you for any help.

lane
02-15-2013, 06:13 PM
So I guess no one has built the Allman engine From Debolt machine.

JCHannum
02-15-2013, 07:50 PM
Lane, I have no experience, but have you tried asking Debolt? Judging by the flywheel, the base is 6"-7" diameter.

http://www.deboltmachine.com/id8.html

Chuck Rhoades
02-21-2013, 07:41 AM
I am in the finishing stages of building an Allman. The base is 7 1/2" dia and 1" thick.

Just let me know whatever you need to know.