PDA

View Full Version : Collet up to 1.375 dia thru Logan 11 inch lathe Spindle .



jimsehr
06-09-2013, 03:09 PM
There is a collet chuck on Ebay that will let you collet up to 1.375 dia thru a 11 inch Logan spindle.
I have a set up like it for my Logan and it comes in handy if you need to collet over 1.125 dia parts.
I don't know the seller but someone asked me about my set up and I thought I would pass it on.
I don't think I would try to run that big of bar stock on a Logan ,but It is handy once in a while. I
used it to collet my 5c collet tube to repair it from parts I got off Ebay.
ebay # 390 608 505 895
They want $250 plus shipping.

jimsehr