If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
They look to be fairly solidly built , the knee is well supported.
The only problem is they will be "imported" to many , but there is possibly lots of old iron been recycled to make something useful.
Michael
I assume you all think it's a mislabeled horizontal mill. I think that it's some sort of a "dual" mill. It looks like that block hanging off the arm on the left side is a vertical mill head that can be swung in to replace the horizontal arbor.
I assume you all think it's a mislabeled horizontal mill. I think that it's some sort of a "dual" mill. It looks like that block hanging off the arm on the left side is a vertical mill head that can be swung in to replace the horizontal arbor.
It is just that, but the "block" is a vertical attachment for a horizontal mill. This is just another case of mistranslation of technical information.
Comment