PDA

View Full Version : New vertical milling machine format



Danl
09-20-2013, 01:13 PM
I can't help but wonder what their horizontal mills look like:

http://www.karamboring.net/all-geared-vertical-milling-machine.htm



Danl

A.K. Boomer
09-20-2013, 01:17 PM
Isn't the only thing that's new about it the fact that's its brand new as in just built?

i mean the layouts been done to death no?

Paul Alciatore
09-20-2013, 02:06 PM
Now I know where those Japanese manual translators from the 70s went to.

John Stevenson
09-20-2013, 02:15 PM
Stands upright off the floor ??

Gotta be vertical ??

Stop nit picking :) anyway the vertical head is hanging from the crane on the side.

MichaelP
09-20-2013, 03:20 PM
The founder and The Machinist of the plant at work: http://www.google.com/imgres?imgurl=http://farm7.staticflickr.com/6166/6204437364_ce0e798824_o.jpg&imgrefurl=http://www.flickr.com/photos/68155509@N02/6204437364/&h=2495&w=3525&sz=212&tbnid=mUuWjeiOY46FxM:&tbnh=90&tbnw=127&zoom=1&usg=__G-d3N6KZ-ZtC9_Yy-yOz_rJFilA=&docid=1SG3m8zsWnD1JM&sa=X&ei=eZ88UvriBoOg2gXEx4HgCg&ved=0CDwQ9QEwBA&dur=629

Lew Hartswick
09-20-2013, 05:00 PM
" kaRam" sounds a bit like "Captain Marvel" is around again. :-)
...lew...

A.K. Boomer
09-20-2013, 05:14 PM
The founder and The Machinist of the plant at work: http://www.google.com/imgres?imgurl=http://farm7.staticflickr.com/6166/6204437364_ce0e798824_o.jpg&imgrefurl=http://www.flickr.com/photos/68155509@N02/6204437364/&h=2495&w=3525&sz=212&tbnid=mUuWjeiOY46FxM:&tbnh=90&tbnw=127&zoom=1&usg=__G-d3N6KZ-ZtC9_Yy-yOz_rJFilA=&docid=1SG3m8zsWnD1JM&sa=X&ei=eZ88UvriBoOg2gXEx4HgCg&ved=0CDwQ9QEwBA&dur=629

Wow - all that technology going for him and he don't know a thing about proper seat height...

jdincau
09-20-2013, 06:36 PM
Wow brand new shapers and planers!

mike4
09-20-2013, 06:43 PM
They look to be fairly solidly built , the knee is well supported.
The only problem is they will be "imported" to many , but there is possibly lots of old iron been recycled to make something useful.
Michael

_Paul_
09-20-2013, 09:24 PM
42" Shaper now you're talking

KMoffett
09-21-2013, 08:41 AM
I assume you all think it's a mislabeled horizontal mill. I think that it's some sort of a "dual" mill. It looks like that block hanging off the arm on the left side is a vertical mill head that can be swung in to replace the horizontal arbor.

Just my 2 cents...gotta go get some coffee.

Ken

Dr Stan
09-21-2013, 11:05 AM
I assume you all think it's a mislabeled horizontal mill. I think that it's some sort of a "dual" mill. It looks like that block hanging off the arm on the left side is a vertical mill head that can be swung in to replace the horizontal arbor.

It is just that, but the "block" is a vertical attachment for a horizontal mill. This is just another case of mistranslation of technical information.

The Artful Bodger
09-21-2013, 03:41 PM
It is just that, but the "block" is a vertical attachment for a horizontal mill. This is just another case of mistranslation of technical information.

Mistranslation? Maybe but there are probably more English speakers in India than the entire USA.