PDA

View Full Version : Back Issues or copies of articles



chestef
04-29-2004, 11:51 AM
I think this forum and the Home Shop Machinist magazine are just great. I have had only one problem and that is getting instructions on obtaining "Back Issues"

I am willing to accept xerox copies of a specific article I'm interested in but cannot find a person to talk or write to. I tried a 3rd party microfilm and copy source but they no longer provide the service.

Can anyone assist me, please?

------------------
Contemporary Blacksmith with building projects from foundry to an S/C Cobra

bernie
04-29-2004, 12:04 PM
Most issues are available contact: dneuman@villagepress.com

pgmrdan
04-29-2004, 12:26 PM
Or call the 800 number listed in the magazine. 800-447-7367.

Page 77 of the new HSM gives the information.

Just call them with a list of back issues you want and have your credit card handy. They're very reasonably priced when compared with some other magazines I've dealt with.

G.A. Ewen
04-29-2004, 02:23 PM
This might be of interest to you,

Opps, that didn't work. How about this?

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=280&item=4207708044&rd=1&s sPageName=WDVW (http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=280&item=4207708044&rd=1&ssPageName=WDVW)

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=280&item=4207708283&rd=1&ssPageName=WDVW

[This message has been edited by G.A. Ewen (edited 04-29-2004).]

[This message has been edited by G.A. Ewen (edited 04-29-2004).]