View Full Version : grizzly/craftex 12x36 lathe feed & threading poster

04-21-2015, 09:23 PM
Hi all, this may be my first post but i have been lurking for quite awhile. I have a craftex 12x36 metal lathe with i believe is very similar to the grizzly. I got sick of always bending down or checking the side cover to view the feed speed and threading charts, so i made a spreadsheet for myself and printed it out at 11 x 17 then laminated it. This will be put on the wall behind my lathe for quick viewing. It took a long time to make so i thought id share for all to use if they can. If someone could verify that the grizzly chart is the same that would be great.

http://img.photobucket.com/albums/v282/jake_walsh/hh/metric%20feed.jpg (http://smg.photobucket.com/user/jake_walsh/media/hh/metric%20feed.jpg.html)

http://img.photobucket.com/albums/v282/jake_walsh/hh/inch%20feed.jpg (http://smg.photobucket.com/user/jake_walsh/media/hh/inch%20feed.jpg.html)

Here is the spreadsheet published with google documents, i tried this originally but i cant figure out how to remove the boxes around the pictures i created, any help would be much appreciated.


I also have the threading charts made up and will post them if this proves to be of interest.

Cheers, Jake.