PDA

View Full Version : Linuxcnc and a Holbrook Minor



skunkworks
12-08-2016, 03:33 PM
First you have to read about his cnc conversion of the Holbrook - it is truly amazing.. (need new castings? no problem - make some patterns and have a local foundry make them in cast iron.)

Notice the jog wheels for carriage and cross slide..

http://bodgesoc.blogspot.com/search/label/Holbrook%2001%20Single%20Phase%20Conversion

A video when it was mostly completed..

https://www.youtube.com/watch?v=woU927Tqoo8

and in Andy fashion - Crank grinding mock-up..


https://www.youtube.com/watch?v=z6dK41_usfQ

RB211
12-08-2016, 07:53 PM
First you have to read about his cnc conversion of the Holbrook - it is truly amazing.. (need new castings? no problem - make some patterns and have a local foundry make them in cast iron.)

Notice the jog wheels for carriage and cross slide..

http://bodgesoc.blogspot.com/search/label/Holbrook%2001%20Single%20Phase%20Conversion

A video when it was mostly completed..

https://www.youtube.com/watch?v=woU927Tqoo8

and in Andy fashion - Crank grinding mock-up..


https://www.youtube.com/watch?v=z6dK41_usfQ

Very cool but not how I would do it