PDA

View Full Version : New Workshop ideas wanted



Errol
08-18-2001, 03:43 AM
What happened to the ongoing discussion on new shop ideas? It used to be at http://bbs.homeshopmachinist.net//Forum1/HTML/008171.html )

In any case, I would like to thank everyone for the absolute tremendous quantity of quality suggestions for my upcoming new shop. The latest ideas of placing plates in the concrete floor as attachment points is a super idea. This is the stage I'm at now, planning the footings, then floor if it can be done before freeze-up. I will most definitely use the imbedded plates as a feature.

Fortunately I made a recent printout (27 pages) of your suggestions, so I have all your most excellent thoughts except the last five or so responses.

I don't know why the topic disappeared..... possibly Neil thought it was off topic.

MarkT
08-18-2001, 04:21 AM
It still exists, but now it is posted under the wrong date due to the system problems. If you click on your link you can still find it.



[This message has been edited by MarkT (edited 10-05-2004).]

MarkT
10-05-2004, 12:31 PM
Just making this current again.