Mr fluffy,
I just googled fuel injectors and fuel nozzle design into the image option and got a lot of pic's for nozzles, have you had any luck with...
Guys, you have come through again for me and maybe someone else here, or in the "CLOUD" as they call it.
Thank you very much, I can now go buy a new...
Something you might try is if you know of an electrician that works for a larger shop. Have them check, they may have a camara that they could borrow...
Hello Group,
I just read the beginners article in this months HSM magazine about micrometers and have to say as a newbie/beginner it was informative...
I built my shop 3 yrs ago with a 6" slab and 8" wire mesh on dobbies. The one thing I might suggest is not only put down a vapor barrier but consider...
The axle needs t be turned down from .75 to fit a 5/8"ID bearing that is pressed on. I like the idea of a steady rest and the use of it at the right...
Hello Group,
I have posted about the bearings in the gokart hubs being stuck, I got them out and saved them without damage using the drift punch and...
EVguru, Paul, Should the spacer be the size of the outer race not the inner race to keep from ruining the bearings if I do bore all the way through?...
Find latest posts