Does anyone still make horizontal milling cutters? I don't believe I have ever seen one in any catalog, whether in print or online. Of course, there...
I've seen the R8 quickchange set made by Royal for many years. A guy wants to sell me a set of 26 pieces of quickchange set. But it's made by Yuasa,...
Truth be told, it's going to be a bitch to get two identical perfect pieces. I would use an oxypropane track burner to make the cut. But you'd need a...
Make a shallow box. In the box put a partly inflated wheelbarrow tire innertube. On the innertube, put a heavy plate. This could be metal, or maybe a...
After thinking about it, I don't remember seeing any angle adjustment in the video. So it's always grinding drills to 118 degrees? 135 degrees? Can't...
To me, buying a set of cheap end mills in a box is silly. Buy good quality in a few sizes and USE THEM. When you need a 7/16" end mill (which I never...
My shop was originally a largeish 2-car garage under my house. Being connected to a house, of course tracking chips into the house is a big problem....