BadDog
Senior Member

I was going to add almost exactly what rklopp posted, so I'll just second on all points. Even with the plugs, Rubberflex needs a good bit in the...

Ahh, sounds like I was there in spirit at least. :D Great work as always! And given your location, the JD green is appropriate. These days I'm...

On the OT line, is there some confusion between "spray transfer" (which is a high energy GMAW process) and metal spray coating process? The high...

And I've got an old Craftsman 1/2" gear reduction drill motor that drives my mill knee z-axis feed. GREAT when going between jobber length drills in...

About the drills, think of it this way. Imagine doing a nice job on some heavy wood work running heavy screws. Maybe one with a small long bit for...

A friend turned me on to sharp Cermets shortly after I got my big lathe. These things will take a 2 thou cut with slow feed on hard bearing races at...

It is very similar to the picture posted. Just a mico-switch to trip the relays out, and a band around a "drum". Very effective in the forward...