Better a stay in place command than a go home. If a robot is on fire or carrying a payload on fire the last thing I would want is for it to be packed...
Ive been buying from Ferrules Direct for years. I have one of their basic ferrule crimpers myself and we bought 3 more for use at work. Work fine. W...
Oh, and those caps are around the audio chip, so they are probably just there to provide decoupling on the audio output of the chip. I am betting if...
The time for most of the bad caps has long past, yeah, you will still get one now an again like in the power supply, but the big issue was in the P4...
I pay for it, I have over 21k photos on there and almost 4 mil views since I started out. It is a great way for me to distribute photos after shoots...
We dont go back to the moon because there is nothing to go back for. Sure there might be He3 but right now about the only thing that stuff is useful...
I like the sharp profile dcmt inserts on my 10ee, I have a bunch of different holders that use them and it takes no time put put a new one in. I have...
Yeah, saw him make the cylinder and seals just are not going to hold up. Oh well, like most of his projects, poorly engineered, that big vise and the...
There is not much to worry about with BeCu. in solid form it is harmless and you would have to make dust for it to create an issue, so as long as you...
For milling I am 100% cnc, I can generally do just about anything on a cnc mill faster and more accurate than what people can do on a manual machine...
Unless there is a specific reason to take it apart, leave it alone. The internals of this kind of stuff are usually done in some sort of a cleanroom...
We calibrated the hardness testers at the shop I worked at. The only time you had to replace the standard is when you used it up. So just buy a used...
No, od3 is not good enough. Usually around OD4 specific to that wavelength. We use a lot from Kentek on the few machines we build that have windows....
At the wavelength that a co2 operates at, usually 10.6um, most plastics are completely opaque and generally can be cut. Acrylic cuts the best, as you...
The reason you do a spindle warm up is to redistribute the grease in the bearings, that's what the manual on my Precise spindle says. I dont believe...
Find latest posts