Today I was given this large (by my standards) spiral taper reamer. It has an MT3 drive, its large dia is 53mm, small dia is 42.5mm, length is 76mm,...
Guys, this indexing head is of interest mainly because its very local. I don't have an immediate need for an indexing head and don't know much about...
Taydin, to me a DCMT insert is a little delicate for that type of work. A CCMT insert will be more robust, brazed carbide would be even more robust,...
If you want to know just how cynically and manipulatively the Pop Idol etc genre of reality TV shows is put together read Ben Elton's 'Chart Throb'....
On the left is a Toyota 21 spline 28mm clutch centre, I need to reduce the OD and weld a flange to it so it ends up looking like the RH clutch centre...
I have an aluminium furnace running on LPG with 2" thick perlite/high temp cement walls, internal temps are around 1500°F. As a rough guide external...