Go Back   The Home Shop Machinist & Machinist's Workshop BBS > Gunsmithing
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-29-2009, 12:09 PM
fortcollinsjerry fortcollinsjerry is offline
Junior Member
 
Join Date: Oct 2009
Posts: 20
Default rifle magazine conversion

I'm not sure that this fits in the gun building but recently I was faced with a magazine problem for my M1A Scout .308. I wanted to use it this season in Missouri hunting white tails. One of the Missouri rules on firarms stated that a magazine holding more than 11 rounds was illegal. I have a 5 round flush fitting magazine from Springfield but it's a POS and you need to use a screwdriver to remove it from the reciever once you snap it in. Otherwise I only own 20 round magazines that came with the rifle.

To solve this problem I removed the springs and followers from the two magazines and made a wood block filler to take up the majority of the space. Inserted the spring and follower from the 5 rounder into the 20 and followed that up with the block. I just arbitraraly decided on a 4 round capacity. I shouldn't need more than one round anyway. Now I have a full size magazine I can grab and pull out of the reciever nice and easy

__________________
Jerry Crawford
I, also, have tools I don't know how to use
Reply With Quote
  #2  
Old 10-30-2009, 05:30 AM
BigBoy1 BigBoy1 is offline
Senior Member
 
Join Date: Jun 2006
Location: Elizabeth City, NC
Posts: 594
Default Good Idea

This same principle has been used for years with duck hunting shotgus, A wooden plug in put in the magazine to limit the number of shells tha can be placed in the magazine tube.
__________________
Bill

Being ROAD KILL on the Information Super Highway and Electrically Challenged really SUCKS!!
Reply With Quote
  #3  
Old 10-30-2009, 02:11 PM
Bob D. Bob D. is offline
Junior Member
 
Join Date: Oct 2009
Location: New Jersey
Posts: 14
Smile another use

NJ banned magazines holding over 15 rounds a few years ago. To the best of my knowledge, no one sells such items so we had to permanently modify our 20 or 30 rounders to suit the law. Epoxying in a wooden filler block seems to fit the bill. There doesn't seem to be a need to modify the spring, as it behaves as if it was still under the tension of some rounds when the mag is empty.
This is a "common sense" solution, not guaranteed to be legally accepted by NJ. Any reasonable game warden should find your method acceptable, but due to the perceived hi-cap mag, you may receive additional scrutiny in the field.
Good luck and good hunting!
Reply With Quote
  #4  
Old 11-03-2009, 01:25 PM
scatter cat scatter cat is offline
Member
 
Join Date: Jan 2009
Location: Near Hot Springs Ar.
Posts: 70
Default

Why don't you just buy a 10rd mag? Lots of places have them.Centerfire Systems has them in their fall catalog for 6.99 ea. Cheap and you don't have to mess up a good 20rd mag.Flat rate shipping of 9.99 Find a few more thing you want/need you can come out pretty good on the shipping. www.centerfiresystems.com
Reply With Quote
  #5  
Old 11-05-2009, 05:31 PM
Bob D. Bob D. is offline
Junior Member
 
Join Date: Oct 2009
Location: New Jersey
Posts: 14
Default why I didn't just buy 10 round mags...

1) I already had a few 20 rounders on hand, and could not legally keep them as such (no grandfathering in this law).


2) I can legally have 50% more capacity than 10 rounders have.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:08 PM.