Results 1 to 7 of 7

Thread: Barber Colman gear hobber

  1. #1
    Join Date
    Mar 2001
    Location
    Nottingham, England
    Posts
    15,247

    Default Barber Colman gear hobber

    Any idea what size a Barber Colman No. 3 gear hobber will go up to ?
    There's one on Ebay at the moment that may suit what I want if it will go large enough.

    .
    .

    Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.




  2. #2
    Join Date
    Nov 2001
    Location
    Toledo, Ohio
    Posts
    9,140

    Default

    Is it this one? Catalog specs are listed in the description.

    http://cgi.ebay.com/ws/eBayISAPI.dll...category=92083
    Jim H.

  3. #3
    Join Date
    Mar 2001
    Location
    Nottingham, England
    Posts
    15,247

    Default

    Thanks Jim,
    No it is this one

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=7608230783

    and no specs listed for this but it's the same machine, just a bit cheaper
    .

    Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.




  4. #4
    Join Date
    Nov 2001
    Location
    Toledo, Ohio
    Posts
    9,140

    Default

    Posted after your reply;

    http://cgi.ebay.com/Gear-Cutter-Hobb...QQcmdZViewItem

    I like the rope start feature.
    Jim H.

  5. #5
    Join Date
    Mar 2001
    Location
    Nottingham, England
    Posts
    15,247

    Default

    Probably not got the right value caps fitted, no matter as I have 440 volt three phase.

    .
    .

    Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.




  6. #6
    Join Date
    Jan 2003
    Location
    On the Oil Coast,USA
    Posts
    16,871

    Default

    But John,it doesn't inculde any extra floor
    I just need one more tool,just one!

  7. #7
    Join Date
    Mar 2001
    Location
    Nottingham, England
    Posts
    15,247

    Default

    Must do, it's stood on a bit in the photo.

    [Edit]

    Rang the guy up and it doesn't come with the piece of floor

    Anyway £683 is far too much to pay for a spares machine.
    There are people out there with more money than sense
    Last edited by John Stevenson; 04-18-2006 at 08:49 AM.
    .

    Sir John , Earl of Bligeport & Sudspumpwater. MBE [ Motor Bike Engineer ] Nottingham England.




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •