Hello all,
I have a 13x40 lathe (purchased used) that is to end up in my basement, requiring lifting from the headstock end using a hoist. The hoist/lathe will then be moved through a 36" wide door onto some ramps before being lowered about five feet to the basement, the lathe just fitting between the ramps. The attached picture from the machine's operating manual shows an eyebolt lifting arrangement that looks perfect for moving. I contacted the factory and they said the eyebolt assembly is not available. I wondered if anyone has built anything like this? I am concerned about clamping something around the bed that would damage the ways.

http://s600.photobucket.com/albums/t...340Lifting.jpg

Thanks,
Mark