Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: ?big Bore Pistols?

  1. #1
    Join Date
    Sep 2004
    Posts
    2,896

    Default ?big Bore Pistols?

    Any Big Bore Handgun enthusiasts out there? I always fancied a .50 cal single action with a 5 and a half inch Barrel or so. Have any of you Gentlemen built such a Piece ??thanx Mike (Junior Gun Enthusiast)

  2. #2
    Join Date
    Jul 2003
    Location
    Southern Oregon
    Posts
    598

    Default Big Bore

    Hi
    No. I have not built one but I've been shooting and reloading for a .44 magnum for many years. The only .50 caliber I have is a black powder rifle.
    A .50 caliber handgun would be a little more than I would care to shoot.
    The Ruger super blackhawk in .44 mag. is my favorite handgun.
    Yankee1

  3. #3
    Join Date
    Apr 2005
    Location
    Saugerties, NY 2 hours north of NYC
    Posts
    49

    Default

    I too had a Ruger super blackhawk in .44 mag. that I honed the action on. I never could hit a thing using full powered .44 mag loads so I took to reloading .44 Special cartridges using 245 grain cast bullets. That was a pleasure to shoot and accurate too. That Ruger was a very stout pistol. I did buy a Redfield mount to place a scope on, but never got around to do the job. I kinda miss the old gal. Maybe one day I'll get another and try to shoot full powered loads. It takes a very special kind of person to shoot those big bore hand cannons. I guess I was not one of them back in the 1970's. Oh, to be able to do it all over again.

  4. #4
    Join Date
    Jun 2006
    Location
    NE Corner of NC
    Posts
    885

    Default Big Bore Handguns

    Are you talking about a 50 BMG caliber handgun? That would not be feasible as the weight of the handgun to accept the recoil would make hand holding impossible without downloading the powder in the cartridge to reduce the muzzle velocity. Also, the muzzle flash would be very large as the powder in the std 50 BMG round is made to burn in a barrel that is about 3 feet long and firing it in a barrel a foot long would result in much unconsummed powder being thrown out of the muzzle.

    I have not made any big bore handgun but I enjoy shooting them. I have a .45-70 cal. revolver, S&W 629 in .44 Mag. and a .44 AMP Auto Mag.

    Bill

  5. #5
    Join Date
    Jan 2008
    Posts
    14

    Default

    Could always go .50 GI...
    A kinda scaled up .45 ACP.

  6. #6
    Join Date
    Feb 2004
    Posts
    304

  7. #7
    Join Date
    Aug 2003
    Location
    Nazareth, PA
    Posts
    2,398

    Default

    Quote Originally Posted by meho
    yup. one misconception most folks have is regarding recoil. the recoil in the 50BMG is generated by the gases as the bullet moves down the barrel. no barrel= no recoil. for the most part all these 50BMG handguns are is a big way to generate huge muzzle-flash.

    now the 50 Action Express is certainly a viable .50 caliber handgun. the Desert Eagle semi-auto is actually a pleasure to fire in 50AE.

    andy b.

  8. #8
    Join Date
    Jan 2006
    Location
    The Edge of Death Valley, NV side
    Posts
    241

    Default

    I've fired two separate versions of the Maadi-Griffin, and the recoil was comparable to firing a 12 gauge shotgun held in one hand, it was easily manageable. Never saw the point to the gun however. Accuracy was so-so, muzzle flash could BBQ a large pig from 30 feet.
    Steve
    NRA Life Member

  9. #9
    Join Date
    Sep 2004
    Posts
    2,896

    Default Nice

    I have shot and owned .44 smith (old model) slicked action full house loads in a SS 8. 3/8 inch Barrel (used to carry it up north hunting in a Uncle Mikes Chest Holster Heavy and hugeLOL) Then 45-70 pistol (thompsom contendor) Nice shootuing Pistol also have 30-30- contendor accurate pistol. I am interested in a .50 single action Bisley type revolver, I am 250 pounds and am used to heav\y recoil.

  10. #10
    Join Date
    Feb 2009
    Posts
    25

    Default

    A co-worker is going through his waiting period for a T.C. 500. were supposed to take it out in a week or so.Looks like a nice gun.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •